features low capacitance - 0.3 pf esd protection vcc + six i/o data lines rohs compliant* applications usb 3.0 hdmi 1.4 high speed port protection portable electronics absolute maximum ratings, t a = 25 ? (unless otherwise noted) CDDFN10-0506N - tvs/steering diode array *rohs directive 2002/95/ec jan. 27, 2003 including annex and rohs recast 2011/65/eu june 8, 2011. speci cations are subject to change without notice. customers should verify actual device performance in their speci c applications. parameter symbol rating unit peak pulse current (t p = 8/20 s) i pp 3.5 a peak pulse current (t p = 8/20 s) p pk 40 w operating supply votage (v dd - gnd) v dc 6v dc voltage on any i/o pad v io (gnd -0.5) to (v dd +0.5) v storage temperature t stg -55 to +150 oc operating temperature t opr -40 to +85 oc general information the bourns ? model CDDFN10-0506N device provides esd and eft protection for high speed data ports meeting iec 61000-4-2 (esd) and iec 61000-4-4 (eft) requirements. the transient voltage suppressor array, protecting up to six data lines, offers a working peak voltage of 5.0 v. the dfn-10 package is easy to handle with standard pick and place equipment and their ? at con? guration minimizes roll away. electrical characteristics (@ t a = 25 ? unless otherwise noted) parameter symbol min. typ. max. unit working peak voltage 1 v wm 5.0 v breakdown voltage @ 1 ma 1 v br 6.0 v forward voltage @ 15 ma 2 v f 0.8 1.2 v leakage current @ v wm 1 i l 2.5 a leakage current @ v wm 3 i io 1 a channel capacitance 3 @ 2.5 v, 1 mhz c io 0.25 0.35 pf channel to channel capacitance 4 @ 2.5 v, 1 mhz c cross 0.05 0.07 pf esd protection per iec 61000-4-2 contact discharge air discharge 8 15 kv kv esd dynamic turn-on resistance 5 r dynamic_i/o 0.35 esd dynamic turn-on resistance 6 r dynamic_vdd 0.2 eft protection per iec 61000-4-4 @ 5/50 ns 40 a note 1: pin 2 to pin 9 note 2: pin 9 to pin 2. note 3: pin 1, 4, 5, 6, 7 or 10 to ground. note 4: between i/o 1, 4, 5, 6, 7 or 10. note 5: any i/o pin to ground. note 6: v dd pin to ground. *rohs compliant 10 7 6 5 4 1 2 9
4.024 - 4.176 (0.158 - 0.164) 1.924 - 2.076 (0.076 - 0.082) 0.224 - 0.376 (0.009 - 0.015) 0.200 (0.008) 0.450 - 0.550 (0.018 - 0.022) 0.000 - 0.050 (0.000 - 0.002) 0.152 (0.006) ref. n6 n5 n1 n10 min. 0.150 - 0.250 (0.006 - 0.010) 1.300 - 1.500 (0.051 - 0.059) 0.700 - 0.900 (0.028 - 0.035) speci cations are subject to change without notice. customers should verify actual device performance in their speci c applications. CDDFN10-0506N - tvs/steering diode array product dimensions pin out this is a molded dfn10 package with lead free 100 % matte sn on the lead frame. it has a ammability rating of ul 94v-0. recommended footprint how to order cd dfn10 - 05 06 n common diode chip diode package dfn10 = dfn-10 package working peak reverse voltage 05 = 5.0 v rwm (volts) number of lines 06 = 6 data lines suf x n = low capacitance typical part marking CDDFN10-0506N ........................................................................506 dimensions: mm (inches) pin function 1 i/o line 2v cc line 3 n.c. 4 i/o line 5 i/o line 6 i/o line 7 i/o line 8 n.c. 9 ground 10 i/o line 0.600 (0.023) 0.150 - 0.250 (0.006 - 0.010) 0.800 (0.031) typ. typ. 0.400 (0.015) typ. 0.200 (0.008) min. 1.924 - 2.076 (0.076 - 0.082) 1.300 - 1.500 (0.051 - 0.059) 0.700 - 0.900 (0.028 - 0.035) 1 2 3 4 5 10 9 8 7 top view 6
speci cations are subject to change without notice. customers should verify actual device performance in their speci c applications CDDFN10-0506N - tvs/steering diode array reference application bourns model CDDFN10-0506N is designed to protect high speed data ports from esd transients. for high speed ports above 5 gb/s such as usb 3.0, differential signalling is used where the need to keep impedance constant is a critical requirement. th e use of a dfn-10 package using a ?eed through?layout provides a minimum impedance change on the high speed data line while the ultra-low capacitance performance of the device limits the signal loss degradation of each channel. 1 2 3 4 5 10 data line data line data line data line data line data line 9 8 n.c. gnd n.c. vdd vdd rail * optional 0.1 f chip cap. to i/o-port connector to i/o-port connector to protected ic to protected ic 7 CDDFN10-0506N layout on usb 3.0 port CDDFN10-0506N using 5 ghz eye diagram 6
3312 - 2 mm smd trimming potentiometer -3 -6 -9 -12 -15 -18 -21 -24 -27 -30 0 1e+8 1e+9 frequency (hz) insertion loss (db) 4.1 ghz: -3 db vdd = 5 v vdd = floated -60 -50 -40 -30 -20 -10 0 1e+8 1e+9 frequency (hz) analog cross talk (db) vdd = 5 v vdd = floated 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 input voltage (v) input capacitance (pf) f = 1 mhz, t = 25 ? vdd = floated vdd = 5 v 0 2 4 6 8 10 12 14 16 18 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 voltage (v) current (a) 0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 input voltage (v) input capacitance (pf) f = 1 mhz, t = 25 ? vdd = floated vdd = 5 v v_pulse 100 ns tlp_i tlp_v + - dut pulse from a transmission line vdd to gnd i/o to gnd CDDFN10-0506N - tvs/steering diode array performance curves insertion loss s21 crosstalk between i/os channel capacitance versus voltage channel to channel capacitance versus voltage typical v/i characteristic speci cations are subject to change without notice. customers should verify actual device performance in their speci c applications.
3312 - 2 mm smd trimming potentiometer speci cations are subject to change without notice. customers should verify actual device performance in their speci c applications. CDDFN10-0506N - tvs/steering diode array packaging information ....... ....... ....... ....... ....... ....... ....... ....... pa f e t 120 d 2 d d 1 w 1 c index hole p 0 p 1 w b 10 pitches (min.) direction of feed 10 pitches (min.) end trailer device leader start d the product will be dispensed in tape and reel format (see diagram below). devices are packed in accordance with eia standard rs-481-a. dimensions: mm (inches) item symbol dfn-10 carrier width a 2.90 0.10 (0.114 0.004) carrier length b 2.90 0.10 (0.114 0.004) carrier depth c 0.90 0.10 (0.035 0.004) sprocket hole d 1.55 0.05 (0.061 0.002) reel outside diameter d 178 (7.008) reel inner diameter d 1 50.0 (1.969) min. feed hole diameter d 2 13.0 0.20 (0.512 0.008) sprocket hole position e 1.75 0.10 (0.069 0.004) punch hole position f 3.50 0.05 (0.138 0.002) punch hole pitch p 4.00 0.10 (0.157 0.004) sprocket hole pitch p 0 4.00 0.10 (0.157 0.004) embossment center p 1 2.00 0.05 (0.079 0.002) overall tape thickness t 0.20 0.10 (0.008 0.004) tape width w 8.00 0.20 (0.315 0.008) reel width w 1 14.4 (0.567) max. quantity per reel -- 3000 rev. 06/12
|